Lanhang zhongke
Products
Libya LHMH-533L Fiber Abrasion Tester
The fiber abrasion tester is designed and manufactured according to the requirements of "Appendix L Sieving and Abrasion Test Method for Granular Wood Fiber" in the transportation industry standard JT/T 533-2020 "Fiber for Asphalt Pavement". This abrasion tester places granular wood fiber in the grinding system for grinding for a specified time. After that, the vibrating screen system starts to work, sieving the ground fiber, and then completing the quality analysis of the granular wood fiber after grinding and sieving.
Category:
Product Description
Application Range
The fiber abrasion tester is designed and manufactured according to the requirements of "Appendix L Sieving and abrasion test method for granular wood fiber" in the "JT/T 533-2020 Standard for Asphalt Pavement Fiber" of the transportation industry. This abrasion tester puts granular wood fiber into the grinding system for grinding for a specified time. After that, the sieving system starts to work to sieve the ground fiber, thus completing the quality analysis of the granular wood fiber after grinding and sieving.
Technical Parameters
| Grinding Wheel Diameter | 280mm |
| Grinding Wheel Thickness | 4mm |
| Grinding Tooth Length | 50mm |
| Grinding Tooth Width | 15mm |
| Grinding Tooth Angle | 30° |
| Distance from the Grinding Chamber Side Wall | 48mm |
| Spacing in the Diameter Direction of the Grinding Chamber | 10mm |
| Grinding Wheel Speed | 500r/min |
| Sieve Hole Specification | 2.8mm and 4mm |
| Vibration Frequency | 50Hz |
| Vibration Amplitude | 2mm |
| Abrasion Timer | 0~99 seconds |
| Sieving Timer | 0~99 minutes |
| 5-inch color touch screen control, convenient and intuitive operation | |
| Power Supply | 380V 50Hz |
| Size | 600x350x800(length x width x height) |
| Weight | 100kg |
Whatsapp:
E-mail: