Lanhang zhongke
Products
Mauritius New fiber oil absorption rate tester
Product Description
Applications
The LHXY-533B fiber oil absorption rate is applicable to Appendix D "Oil Absorption Rate Test Method" in JT/T533-2020 "Fibers for Asphalt Pavements", issued by the Ministry of Transport of the People's Republic of China, for the determination of the oil absorption rate of fibers used in asphalt pavements for highway engineering.
Product Features
1. Uniform vibration speed, thorough mixing.
2. High-precision counting controller is used to control the vibration time.
Technical Parameters
| Vibration Time | 10min |
| Power Supply | 220v50HZ |
| Sample Sieve Specification | 0.5mm aperture/100MM diameter |
| Vibration Speed | 240 times/minute |
| Vibration Amplitude | 32mm |
| Number of Vibrations | 2400 times |
Usage
1. According to experimental needs, weigh the corresponding mass of fiber and mineral oil mixture, and pour it into the sample sieve on the instrument.
2. Turn on the power supply; the counting and timing digital tubes light up. Click start; the instrument sets the vibration to 2400 times (10min) and automatically stops.
3. Click the timer; after 10min, the instrument will issue an alarm.
4. Turn off the power switch, remove the sample sieve, weigh the mass of the sample sieve and the fiber that has absorbed mineral oil, and calculate the oil absorption rate according to the relevant formula.
5. When performing a second test, repeat the above steps.
Whatsapp:
E-mail: