Lanhang zhongke
Products
Saudi Arabia Laboratory foam asphalt plant
Product Description
Applications
When a small amount of cold water (2-3%) comes into contact with hot asphalt (e.g., 150-160℃), a vigorous heat exchange occurs, causing the cold water to instantly vaporize and resulting in a "foaming" phenomenon in the asphalt. Asphalt in this "foamed" state is generally called foamed asphalt. During the "foaming" process, the volume of the asphalt rapidly expands to several or even ten times its original size, and its viscosity significantly decreases, facilitating mixing with aggregates. Therefore, foamed asphalt is highly suitable for cold in-place recycling and warm mix asphalt technologies in road construction. Foamed asphalt technology originated in the United States, but with the implementation of China's Ministry-issued "Technical Specifications for Asphalt Pavement Recycling of Highways" (JTG F41-2008), foamed asphalt technology has also made significant progress and development in China.
Asphalt Foaming Machine Technical Parameters ：
- Water Consumption: 1.5L/h - 7.0L/h
- Air Consumption: 0L/h - 120L/h
- Maximum Water Pressure: 0.7Mpa
- Air Pressure: 0.4Mpa-0.6Mpa
- Asphalt Temperature: 140°C-200°C
- Asphalt Tank Capacity: 20 liters
- Water Tank Capacity: 10 liters
- Air Chamber Capacity: 10 liters
- Rated Power: Asphalt Pump: 1.5kW; Heater: 2.6kW; Control: 0.1kW
- Inverter Frequency: 0-60HZ
- Power Supply Voltage: 380V
- Asphalt Foam Spray Time Setting: 0.1-999s; Factory Setting: 15s
- Size (Length x Width x Height): 1700x700x1300mm
Mixer Parameters:
1. Double-shaft forced mixing: 30L with built-in electric heating and insulation function
2. Stepless adjustable mixing speed
3. Double-shaft forced mixing, 180-degree tilting discharge
4. Size (Length x Width x Height): 1100x800x1050mm
5. Overall Weight: 210kg
6. Speed: 0-144v/min
7. Voltage: 380V
8. Motor Power: 1.5KW
9. Heating Power: 3.2KW
Whatsapp:
E-mail: